Brake Pedal Excessive Travel
- Were you sent here from SYMPTOMS - HYDRAULIC BRAKE
under TROUBLE SHOOTING? If so, go to next step. If not, see DIAGNOSTIC STARTING POINT - HYDRAULIC BRAKE
under TROUBLE SHOOTING.
- Inspect for proper brake pedal travel. See TRAVEL MEASUREMENT & INSPECTION
under BRAKE PEDAL in ADJUSTMENTS & INSPECTIONS. Is the brake pedal travel distance within the acceptable level? If so, go to step 5
. If not, go to next step.
- Inspect for worn, missing, misaligned, bent or damaged brake pedal system components.
- For the brake pedal pushrod component inspection, see PUSHROD INSPECTION
under BRAKE PEDAL in ADJUSTMENTS & INSPECTIONS.
- Inspect the brake pedal bushings for excessive wear and/or damage and inspect the brake pedal for a bent and/or damaged condition.
Replace the brake pedal system components that are worn, missing, misaligned, bent or damaged, refer to the following procedure(s) as necessary.
Did you find and replace any worn, missing, misaligned, bent or damaged brake pedal system components? If so, go to next step. If not, go to step. 5
- Reinspect for proper brake pedal travel. See TRAVEL MEASUREMENT & INSPECTION
under BRAKE PEDAL in ADJUSTMENTS & INSPECTIONS. Is the brake pedal travel distance within the acceptable level? If so, go to step 9
. If not, go to next step.
- Inspect the hydraulic brake system for proper operation. See HYDRAULIC BRAKE SYSTEM
under SYSTEM TESTS. Did you find and correct a condition? If so, go to step 9
. If not, go to next step.
- Inspect the drum brake system for proper operation. See DRUM BRAKE SYSTEM
under SYSTEM TESTS. Did you find and correct a condition? If so, go to step 9
. If not, go to next step.
- Inspect the disc brake system for proper operation. See DISC BRAKE SYSTEM
under SYSTEM TESTS. Did you find and correct a condition? If so, go to step 9
. If not, go to next step.
- Inspect the brake assist system for proper operation. See BRAKE ASSIST SYSTEM
under SYSTEM TESTS. Did you find and correct a condition? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT - HYDRAULIC BRAKE
under TROUBLE SHOOTING.
- Road test the vehicle in order to confirm proper operation. See BRAKE SYSTEM VEHICLE ROAD TEST
under TROUBLE SHOOTING. Is the condition still present? If so, go to step 2
. If not, system is okay.