LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Wheel Cylinder >> Removal

Wheel Cylinder: Removal

  1. Raise and support the vehicle. Remove the tire and wheel. Remove the brake shoes. See BRAKE SHOES  .
  2. Use Brake Parts Cleaner (GM P/N 12346139) or equivalent, in order to clean the wheel cylinder and the brake pipe. Place a container below the backing plate in order to catch the brake fluid.
  3. Remove the brake pipe from the back of the wheel cylinder. Put a cap on the brake pipe to stop fluid loss. Remove the cap from the bleeder valve. Remove the bleeder valve. Remove the 2 bolts and the wheel cylinder.
scientia non olet · About LEMON Manuals