LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Hardware >> Installation

Park Brake Hardware: Installation

  1. Apply Lubriplate(R) Lubricant, GM P/N 1050109 (Canadian P/N 5264008), or the equivalent, to the metal contact points on the following components:
    • The backing plate.
    • The park brake shoe lever.
    • The adjuster strut.
    • The adjuster.
  2. Assemble the adjuster. See Figure .
  3. Install the park brake hardware with the park brake shoes. See PARK BRAKE SHOES  .
  4. Adjust the parking brake. See DISC PARKING BRAKE ADJUSTMENT  under DISC BRAKES in ADJUSTMENTS & INSPECTIONS. Install the rear brake rotor. See REAR BRAKE ROTOR  . Install the tires and the wheels. Tighten to specification. See TORQUE SPECIFICATIONS  . Lower the vehicle.
scientia non olet · About LEMON Manuals