LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Reservoir >> Installation

Master Cylinder Reservoir: Installation

  1. Use clean brake fluid to lubricate the NEW grommets. Install the grommets to the master cylinder. See Fig 1 . Install the reservoir to the master cylinder. Install the screw. Install the reservoir diaphragm.
  2. Fill the reservoir and install the cap. See MASTER CYLINDER RESERVOIR FILLING  under BLEEDING BRAKE SYSTEM. Inspect the master cylinder for fluid leakage. Connect the brake fluid level switch connector.
Fig 1: Removing & Installing Master Cylinder Reservoir (ABS with M/T Shown; Others Are Similar)
G00305197Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals