LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Pedal Assembly >> Removal

Brake Pedal Assembly: Removal

  1. Disconnect the negative battery cable.
  2. Disconnect the stoplight switch connector.
  3. Remove the clip from the push rod clevis pin. See Figure .
  4. Remove the push rod clevis pin and the washer from the push rod clevis.
  5. Remove the push rod clevis from the brake pedal.
  6. Remove the 4 bracket nuts.
  7. Remove the shaft bolt and the nut.
  8. Remove the pedal from the bracket.
  9. Remove the bushings from the pedal. Remove the cover from the pedal.
scientia non olet · About LEMON Manuals