LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments & Inspections >> Brake Booster Piston Rod

Brake Booster Piston Rod

  1. Place the Brake Booster Piston Rod Height Gage (J-39567) on the master cylinder.
  2. Push the Gage pin down until it touches the master cylinder piston.
  3. Remove the Gage from the master cylinder.
  4. Turn the Gage upside down.
  5. Set the Gage on the booster.
  6. The clearance between the booster piston rod and the Gage should be 0" (0 mm).
  7. If the measurement does not equal the specification, use the Brake Booster Piston Rod Adjuster (J-37767) in order to hold the booster piston rod.
  8. Turn the adjusting screw of the piston rod in order to adjust the clearance.
scientia non olet · About LEMON Manuals