LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Latch Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

  1. Install the door latch handle to the I/P compartment door.
    Fig 1: Installing Door Latch Handle To I/P Compartment Door
    G01559246Courtesy of GENERAL MOTORS CORP.
  2. Install the anti-rattle device to the door latch (2), if equipped.
  3. Install the door latch (2) to the I/P compartment door (3).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the I/P compartment door latch screws (1).

    Tighten 

    Tighten the screws to 2.3 N.m (20 lb in).

    Fig 2: Installing Door Latch To I/P Compartment Door
    G01559247Courtesy of GENERAL MOTORS CORP.
  5. Connect the anti-rattle device to the door latch mounting point, if equipped.
  6. Install the inner I/P reinforcement cover to the I/P compartment door. Refer to DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT  .
  7. Inspect the I/P compartment door for proper operation.
  8. Close the I/P compartment door.
    Fig 3: Connecting Anti-Rattle Device To Door Latch Mounting Point
    G01559248Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals