Installation Procedure
- Position the right I/P trim panel (3) to the I/P (2).NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the right I/P trim screws (1).
Tighten
Tighten the screws to 2.3 N.m (20 lb in).
- Install the I/P accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (CHEVROLET) or TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (PONTIAC) .
- Close the I/P compartment door.