Removal Procedure
- Remove the screws from the instrument panel (I/P) compartment door hinge.
- Open the I/P compartment door.
- Lift up on the I/P compartment door stop strap. Remove the stop strap from the I/P carrier.
- Remove the I/P compartment door from the I/P carrier.
Courtesy of GENERAL MOTORS CORP.
- Remove the screws (2) from the inner I/P reinforcement cover (4).
- Remove the inner reinforcement cover (4) from the I/P compartment door (1).
- Remove the I/P compartment door latch. Refer to LATCH REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT
.
- Remove the I/P compartment door lock cylinder. Refer to LOCK CYLINDER REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT DOOR
.
Courtesy of GENERAL MOTORS CORP.