LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Console Replacement - Front Floor >> Installation Procedure

Installation Procedure

  1. Install the front floor console by guiding the shift boot over the optional shift knob and over the park brake handle.
    Fig 1: Identifying Front Floor Console
    G01559286Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the bolts (6) to the front floor console.

    Tighten 

    Tighten the bolts to 6 N.m (53 lb in).

  3. Lower the armrest (1).
    Fig 2: Installing Front Floor Console
    G01559287Courtesy of GENERAL MOTORS CORP.
  4. Install the optional center storage pocket. Press into place until fully seated.
  5. Install the optional power window switch plate. Refer to POWER WINDOW SWITCH REPLACEMENT in Doors.
    Fig 3: Installing Optional Center Storage Pocket
    G01559288Courtesy of GENERAL MOTORS CORP.
  6. Install the front bolt cover. Press into place until fully seated.
    Fig 4: Installing Front Bolt Cover
    G01559289Courtesy of GENERAL MOTORS CORP.
  7. On vehicles with manual transmission, attach the snaps on the shift boot.
    Fig 5: Attaching Snaps On Shift Boot
    G01559290Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals