Removal Procedure
- Apply the park brake.
- Shift the transaxle shift lever from Park to 1.
- Remove the left instrument panel (I/P) insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT
.
- Remove the steering column filler. Refer to STEERING COLUMN FILLER REPLACEMENT
.
- Tilt the steering wheel to the lowest position.
- Grasp the edge of the I/P cluster trim plate. Pull rearward to disengage the retainers.
- Disconnect the electrical connector from the fog lamp switch.
- Remove the I/P cluster trim plate.
Courtesy of GENERAL MOTORS CORP.