Installation Procedure
- Connect the electrical connector to the fog lamp switch.
- Align the locating pins and the retainers on the I/P cluster trim plate with the openings in the I/P.
- Push in the I/P cluster trim plate at each of the retainer locations. Make sure the retainers are completely engaged.
- Return the steering wheel to the original position.
- Install the steering column filler. Refer to STEERING COLUMN FILLER REPLACEMENT
.
- Install the left I/P insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT
.
- Shift the transaxle shift lever from 1 to Park.
- Release the park brake.
Courtesy of GENERAL MOTORS CORP.