Installation Procedure
- Install the knee bolster bracket to the IP.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the knee bolster bracket bolts at the steering column support.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
- Install the knee bolster bracket bolts at the IP.
Tighten
Tighten the bolts to 2 N.m (18 lb in).
- Install the steering column filler. Refer to STEERING COLUMN FILLER REPLACEMENT .
- Install the left IP insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT .