LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Grand Prix GTP >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Cupholder Replacement - Front Floor Console >> Installation Procedure

Installation Procedure

  1. Install the support springs to the cupholder.
    Fig 1: Installing Support Springs To Cupholder
    G01503676Courtesy of GENERAL MOTORS CORP.
  2. Position the cupholder to the console trim plate. Install the cupholder to the trim plate by pressing into place until fully seated into the pivot points.
    Fig 2: Positioning Cupholder To Console Trim Plate
    G01503677Courtesy of GENERAL MOTORS CORP.
  3. Install the support springs to the console cup holder.
  4. Inspect the cupholder for proper installation.
  5. Install the front floor console trim plate. Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE  .
    Fig 3: Installing Support Springs To Console Cup Holder
    G01503678Courtesy of GENERAL MOTORS CORP.