Installation Procedure
- Connect the electrical connector to the ashtray bracket.
- Install the ashtray bracket to the I/P.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the upper ashtray bracket screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Install the lower ashtray bracket screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Install the ashtray to the bracket.
- Install the front floor console trim plate. Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE .
- Install the I/P cluster trim plate. Refer to TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .