Removal Procedure

Remove the rear roof garnish molding. Refer to GARNISH MOLDING REPLACEMENT - REAR UPPER .
Remove the rear seat belt guide loop from the rear upper quarter trim panel. Refer to SEAT BELT RETRACTOR REPLACEMENT - REAR .
Remove the screw from the rear upper quarter trim panel.

Fig 1: Removing Procedure Trim Panel - Rear Quarter Upper (Aztek) (1 Of 3)
Courtesy of GENERAL MOTORS CORP.
Remove the push pins from the upper quarter trim.

Fig 2: Removing Procedure Trim Panel - Rear Quarter Upper (Aztek) (2 Of 3)
Courtesy of GENERAL MOTORS CORP.
Remove the trim panel from the inner panel, by pulling the panel to release the push-in retainers.
Remove the trim panel from the vehicle.

Fig 3: Removing Procedure Trim Panel - Rear Quarter Upper (Aztek) (3 Of 3)
Courtesy of GENERAL MOTORS CORP.