C0036, C0041, C0046 Or C0051

Under the following conditions, 2 Wheel Speed Sensor Input is 0 DTCs are set:

• The 2 suspect wheel speeds equal zero for 10-20 seconds.
• The other wheel speeds are greater than 16 km/h (10 mph).
• The other wheel speeds are within 11 km/h (7 mph) of each other.

Diagnose each wheel speed sensor individually.

A possible cause of this DTC is electrical noise on the wheel speed sensor harness wiring. Electrical noise could result from the wheel speed sensor wires being routed too close to high energy ignition system components, such as spark plug wires.