LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster panel. Refer to KNEE BOLSTER REPLACEMENT  .
  2. Remove the driver information center (DIC) switch from the trim plate bezel. Refer to DRIVER INFORMATION CENTER SWITCH REPLACEMENT (RENDEZVOUS)  or DRIVER INFORMATION CENTER SWITCH REPLACEMENT (AZTEK)  .
  3. Loosen the steering column bracket. Lower the steering column.
  4. Remove the trim plate bezel from the instrument panel cluster.
    Fig 1: Removing Trim Plate Bezel From Instrument Panel Cluster
    G01517708Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals