LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) >> Installation Procedure

Installation Procedure

  1. Install the trim plate bezel. Press the bezel into place until seated.
  2. Tighten the steering column bracket nuts.

    Tighten 

    Tighten the nuts to 24 N.m (18 lb ft).

  3. Install the DIC switch to the trim plate bezel. Refer to DRIVER INFORMATION CENTER SWITCH REPLACEMENT (RENDEZVOUS)  or DRIVER INFORMATION CENTER SWITCH REPLACEMENT (AZTEK)  .
  4. Install the knee bolster panel. Refer to KNEE BOLSTER REPLACEMENT  .
    Fig 1: Installing Trim Plate Bezel
    G01517709Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals