LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Aztek) >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster panel. Refer to KNEE BOLSTER REPLACEMENT  .
  2. Remove the screws from the I/P cluster trim plate at the assist handle.
  3. Pull out the I/P cluster trim plate in order to release from the retainers.
    Fig 1: Removing Screws From I/P Cluster Trim Plate
    G01517704Courtesy of GENERAL MOTORS CORP.
  4. From the back side disconnect the driver information center (DIC) from the I/P cluster trim plate panel.
  5. Loosen the steering column bracket and lower the steering column.
  6. Remove the I/P cluster trim plate.
    Fig 2: Removing I/P Cluster Trim Plate
    G01517705Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals