LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) >> Installation Procedure

Installation Procedure

  1. Align the locating pins and the retainers from the upper trim panel to the slots in the I/P.
  2. Install the DRL ambient light sensor. Refer to DAYTIME RUNNING LAMPS (DRL) AMBIENT LIGHT SENSOR REPLACEMENT .
  3. If removed, install the sun load sensor.
    Fig 1: Installing Sun Load Sensor
    G01517734Courtesy of GENERAL MOTORS CORP.
  4. Push forward and down on the I/P upper trim panel to lock into place.
  5. Install the windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT -- WINDSHIELD PILLAR .
    Fig 2: Installing I/P Upper Trim Panel
    G01517735Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals