LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the IP insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT  and CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT  .
  2. Remove the bolts from the bottom of the knee bolster.
  3. Pull on the knee bolster in order to release the upper clips.
    Fig 1: Removing Knee Bolster
    G01517700Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals