LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

Important:  Turn the ignition switch to the OFF position before you remove the instrument panel cluster.

  1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER (AZTEK)  or TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER (RENDEZVOUS)  .
  2. Remove the screws from the I/P cluster.
  3. Disconnect the electrical connectors from the I/P cluster.
  4. Remove the I/P cluster.
    Fig 1: Removing I/P Cluster
    G01517744Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals