LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Head Up Display Switch Replacement (Rendezvous) >> Removal Procedure

Removal Procedure

  1. Use a small, Flat Based Tool to remove the driver information center, head up display switch from the cluster trim plate.
    Fig 1: Removing Driver Information Center, Head Up Display Switch From Cluster Trim Plate
    G01517679Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connectors from the switch.
  3. Remove the switch.
    Fig 2: Removing Electrical Connectors From Switch
    G01517680Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals