LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement (Rendezvous) >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Remove the clip from the hood latch.
  3. Disconnect the electrical connector from the sensor.
  4. Remove the ambient air temperature gage sensor from the electrical harness clip.
    Fig 1: Removing Ambient Air Temperature Gage Sensor
    G01517670Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals