LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the ambient air temperature gage sensor.
  2. Install the sensor to the electrical harness clip.
  3. Install the clip to the hood latch.
  4. Close the hood.
    Fig 1: Installing Ambient Air Temperature Gage Sensor
    G01517671Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals