LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster panel. Refer to Knee Bolster Replacement .
  2. Remove the driver information center (DIC) switch from the trim plate bezel. Refer to Driver Information Center Switch Replacement (Aztek)  or Driver Information Center Switch Replacement (Rendezvous) .
  3. Loosen the steering column bracket. Lower the steering column.
  4. Remove the trim plate bezel from the instrument panel cluster.
    Fig 1: Removing Instrument Panel (I/P) Cluster Trim Plate Bezel (Rendezvous)
    G01721747Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals