Installation Procedure

Fig 1: Installing Intermediate Shaft Lower Seal, Upper Seal & Bolts

Courtesy of GENERAL MOTORS CORP.

1. Install the intermediate shaft lower seal over the intermediate shaft end to the steering gear.
2. Install the intermediate shaft upper seal over the lower seat and to the instrument panel.
3. Connect the intermediate shaft to the steering column. Refer to Intermediate Steering Shaft Replacement .
4. Install the intermediate shaft seal to he steering column.
   NOTE: Refer to FASTENER NOTICE .
5. Install the intermediate shaft seal bolts.

Tighten

Tighten the intermediate shaft seal bolts to 3 N.m (27 lb in).