LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Stoplight Switch >> Installation

Stoplight Switch: Installation

  1. Install the stoplight switch into the slotted grooves until switch is fully depressed against the brake pedal, then turn the switch clockwise approximately 1/4 turn, the switch should now be installed and adjusted. See Fig 1.
  2. Connect the electrical connectors.
  3. Install the left side instrument panel insulator.
  4. If necessary, adjust the stoplight switch. See STOPLIGHT SWITCH  under ADJUSTMENTS & INSPECTION.
Fig 1: Removing & Installing Stoplight Switch
G00076424Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals