LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Disconnect brake pipes from the master cylinder.
  2. Disconnect fluid level sensor electrical connector.
  3. Remove master cylinder mounting nuts.
  4. Remove the master cylinder. See Figure
  5. Drain the master cylinder reservoir of all brake fluid.
  6. Remove the master cylinder reservoir. See MASTER CYLINDER RESERVOIR .
scientia non olet · About LEMON Manuals