LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Rotor >> Installation - Front

Installation - Front

  1. Clean any corrosion from the brake rotor flange.
  2. Use the Hub Cleaning Kit (J-42450-A) in order to clean the hub flange.
  3. Install the brake rotor.
  4. Install the brake caliper bracket with the brake caliper. See BRAKE CALIPER BRACKET .
  5. Install the tire and wheel.
  6. Lower the vehicle.
  7. Fill the master cylinder to the proper level. See MASTER CYLINDER RESERVOIR  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
  8. If the brake rotor was refinished, or if a new brake rotor was installed, burnish the brake pads and brake rotors. See BURNISHING PADS & ROTORS  under SERVICING.
scientia non olet · About LEMON Manuals