Weatherstrip Replacement - Front Door Window

REMOVAL PROCEDURE




1. Lower the window to the down position.
2. Remove the trim panel.
3. Remove the water deflector.
4. Remove the outer belt sealing strip.
5. Remove the screw from the window channel.
6. Remove the window channel from the front door frame.

INSTALLATION PROCEDURE




1. Position the window channel into the front door.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the front door window channel screws.

Tighten
Tighten the screw to 10 N.m (89 lb in).

3. Install the window channel to the front door, starting in the top corner working out in both directions.
Firmly seat the window channel to the front door.
4. Inspect the window for proper operation.
5. Install the outer belt sealing strip.
6. Install the water deflector.
7. Install the trim panel.