Air Dryer: Service and Repair

Removal Procedure





1. Clean the area around the connection of the air dryer (3) to the automatic level control air compressor head (4).
2. Rotate the spring clip retaining the dryer to the automatic level control air compressor head 90 degrees.
3. Remove the air dryer (2) from the air dryer bracket (1) and the automatic level control air compressor head.

Installation Procedure





1. Install the air dryer (2) to the air dryer bracket (1) and automatic level control air compressor head (4).
2. Rotate the clip 90 degrees in order to retain the dryer to the automatic level control air compressor head.