Rear

Removal Procedure





1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the left and right side stabilizer shaft insulators and brackets.
4. Remove the left and right stabilizer shaft links.
5. Remove the spare tire from the spare tire hoist.
6. Remove the stabilizer shaft.

Installation Procedure





1. Install the stabilizer shaft.
2. Install the spare tire to the spare tire hoist.
3. Install the left and right stabilizer shaft links.
4. Install the left and right stabilizer shaft insulators and brackets.
5. Install the tire and wheel.
6. Lower the vehicle.