- With Tilt Column
Tilt Wheel HandleRemoval Procedure
1. Disable the SIR system. Refer to Disabling the SIR System in Restraint Systems.
2. Remove the lower trim cover.
3. Remove the tilt lever spring.
4. Remove the retaining bolt from the tilt lever.
5. Remove the tilt lever.
Installation Procedure
1. Install the tilt lever.
2. Install the retaining bolt to the tilt lever.
3. Install the tilt lever spring.
4. Install the lower trim cover.
5. Enable the SIR system. Refer to Disabling the SIR System in Restraint Systems.