Right Front

REMOVAL PROCEDURE




1. Remove the right front seat.
2. Remove the front seat cushion inner trim panel.
3. Remove the nut from the seat belt buckle anchor stud.




4. Remove the seat belt buckle from the right front seat.

INSTALLATION PROCEDURE




1. Install the seat belt buckle to the right front seat.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the nut to the seat belt anchor stud.

Tighten
Tighten the seat belt buckle anchor nut to 42 N.m (31 lb ft).

3. Install the front seat cushion inner trim panel.

4. Install the right front seat.