Rear (Bucket)

REMOVAL PROCEDURE




1. Remove the right and/or left rear bucket seat from the vehicle.
2. Remove the nut cover cup from the right and/or left rear bucket seat belt buckle anchor stud.




3. Remove the nut from the right and/or left rear bucket seat belt buckle anchor stud.
4. Remove the seat belt buckle from the right and/or left rear seat belt anchor stud.

INSTALLATION PROCEDURE




1. Install the rear seat belt buckle to the right and/or left rear seat belt anchor stud.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut to the right and/or left rear bucket seat belt buckle anchor stud.

Tighten
Tighten the right and/or left rear seat belt buckle anchor nut to 42 N.m (31 lb ft).




3. Install the nut cover cup to the right and/or left rear bucket seat belt buckle anchor stud turning clockwise until fully seated.
4. Install the right and/or left rear bucket seat to the vehicle.