LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Evaporative Emissions Hose >> Service and Repair >> Evaporative Emission Hoses/Pipes Replacement - Chassis/Canister

Evaporative Emission Hoses/Pipes Replacement - Chassis/Canister

REMOVAL PROCEDURE




1. Remove the fuel tank.
2. Disconnect the Evaporative Emission (EVAP) purge pipe from the EVAP canister (3).
3. Remove the EVAP purge pipe from the vehicle.

INSTALLATION PROCEDURE




1. Connect the EVAP purge pipe to the EVAP canister (3).
2. Install the fuel tank.
scientia non olet · About LEMON Manuals