Air Temperature Actuator Replacement - Right

REMOVAL PROCEDURE




1. Remove the instrument panel compartment.
2. Disconnect the right side temperature actuator electrical connector.




3. Remove the right side temperature actuator mounting screws.
4. Remove the right side temperature actuator.

INSTALLATION PROCEDURE




1. Install the right side temperature actuator.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the right side temperature actuator mounting screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).




3. Connect the right side temperature actuator electrical connector.
4. Install the instrument panel compartment.