LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 93. Drive Belt Tensioner Installation

93. Drive Belt Tensioner Installation

Drive Belt Tensioner Installation (B Van, N Car, U Van)





1. Install the drive belt tensioner.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the drive belt tensioner bolt.
- Tighten the drive belt tensioner bolt to 50 Nm (37 ft. lbs.).