Coolant Reservoir: Service and Repair

Coolant Recovery Reservoir Replacement

Removal Procedure





1. Reposition the reservoir hose clamp at the radiator overflow fitting.
2. Remove the reservoir hose at the radiator overflow fitting.
3. Remove the mounting clip to the reservoir.
4. Remove the coolant reservoir.

Installation Procedure





1. Install the coolant reservoir.
2. Install the mounting clip to the reservoir.
3. Route the reservoir hose up to the radiator overflow fitting.
4. Connect the reservoir hose to the radiator overflow fitting.
5. Reposition the reservoir hose clamp to secure the hose.
6. Refill the coolant reservoir.