Door Window Weatherstrip

Rear Side Door Window Weatherstrip Replacement

Removal Procedure




1. Place the rear window in the full down position.
2. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
4. Remove the outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement (Rear Door Window Belt Outer Sealing Strip Replacement).
5. Remove the screw from the rear window channel.
6. Remove the channel from the rear door.

Installation Procedure




1. Position the channel to the rear door starting in the corner.
Work outward in both directions.
2. Firmly seat the channel to the rear door.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screw to the rear window channel.

Tighten the screw to 10 Nm (89 lb in).

4. Inspect the rear door window for proper operation.
5. Install the outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement (Rear Door Window Belt Outer Sealing Strip Replacement).
6. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
7. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair