Door Window Weatherstrip

Front Side Door Window Weatherstrip Replacement

Removal Procedure

1. Lower the window to the down position.




2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair.
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair.
4. Remove the outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement (Front Side Door Window Belt Outer Sealing Strip Replacement).
5. Remove the screw from the window channel.
6. Remove the window channel from the front door frame.

Installation Procedure




1. Position the window channel into the front door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the front door window channel screws.

Tighten the screw to 10 Nm (89 lb in).

3. Install the window channel to the front door, starting in the top corner working out in both directions.
Firmly seat the window channel to the front door.
4. Inspect the window for proper operation.
5. Install the outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement (Front Side Door Window Belt Outer Sealing Strip Replacement).
6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair.
7. Install the trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair