Seat Cushion Inner Trim Panel Replacement (Front Bucket)

Seat Cushion Inner Trim Panel Replacement (Front Bucket)

Removal Procedure

1. Remove the front bucket seat. Refer to Bucket Seat Replacement (Bucket Seat Replacement).




2. Remove the screw from the rear of the front seat cushion trim panel.




3. Remove the screw from the front of the front seat cushion trim panel.




4. Remove the screw from the center of the front seat cushion trim panel.




5. Remove the front seat cushion trim panel from the front bucket seat.

Installation Procedure




1. install the front seat cushion trim panel from the front bucket seat.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screw to the center of the front seat cushion trim panel.

Tighten the front seat cushion trim panel center screw to 43 Nm (32 lb ft).




3. Install the screw to the front of the front seat cushion trim panel.

Tighten the front seat cushion trim panel front screw to 43 Nm (32 lb ft).




4. Install the screw to the rear of the front seat cushion trim panel.

Tighten the front seat cushion trim panel rear screw to 43 Nm (32 lb ft).

5. Install the front bucket seat. Refer to Bucket Seat Replacement (Bucket Seat Replacement).