Rear Seat Cushion Cover Replacement (Split Bench)

Rear Seat Cushion Cover Replacement (Split Bench)

Removal Procedure

1. Remove the rear split bench seat from the vehicle. Refer to Rear 50-50 Split Seat Replacement (Rear 50-50 Split Seat Replacement).
2. Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement (Bucket) (Rear Seat Back Cushion Replacement (Bucket))Rear Seat Back Cushion Replacement (Split Bench) (Rear Seat Back Cushion Replacement (Split Bench)).
3. Remove the rear seat adjuster. Refer to Rear Seat Adjuster Replacement (Bucket) (Rear Seat Adjuster Replacement (Bucket))Rear Seat Adjuster Replacement (Split Bench) (Rear Seat Adjuster Replacement (Split Bench)).




4. Remove the J-hook retainers on the rear center of the rear seat cushion cover.




5. Remove the J-hook retainers on the left rear edge of the rear seat cushion cover.




6. Remove the J-hook retainers on the left side of the rear seat cushion cover.




7. Remove the J-hook retainers on the right side of the rear seat cushion cover.




8. Remove the hog rings from the rear seat belt area.




9. Remove the hog rings from the rear seat cushion cover.




10. Remove the rear seat cushion cover from the bottom of the rear seat cushion.




11. Remove the hog rings from the rear seat cushion cover.




12. Remove the rear seat cushion cover from the rear seat cushion.

Installation Procedure




1. Place the rear seat cushion cover to the rear seat cushion.




2. Install the rear seat cushion cover to the rear seat cushion with hog rings.




3. Install the rear seat cushion cover to the rear seat cushion.




4. Install the hog rings to the rear seat cushion cover.




5. Install the hog rings to the rear seat belt area.




6. Install the J-hook retainers on the rear center of the rear seat cushion cover.




7. Install the J-hook retainers on the left rear edge of the rear seat cushion cover.




8. Install the J-hook retainers on the left side of the rear seat cushion cover.




9. Install the J-hook retainers on the right side of the rear seat cushion cover.
10. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement (Bucket) (Rear Seat Back Cushion Replacement (Bucket))Rear Seat Back Cushion Replacement (Split Bench) (Rear Seat Back Cushion Replacement (Split Bench)).
11. Install the rear seat adjuster. Refer to Rear Seat Adjuster Replacement (Bucket) (Rear Seat Adjuster Replacement (Bucket))Rear Seat Adjuster Replacement (Split Bench) (Rear Seat Adjuster Replacement (Split Bench)).
12. Install the rear split bench seat to the vehicle. Refer to Rear 50-50 Split Seat Replacement (Rear 50-50 Split Seat Replacement).