Luggage Carrier Cross Rail Replacement

Luggage Carrier Cross Rail Replacement

Removal Procedure




1. Remove the luggage carrier side rail trim covers from the rear of the rails using a small flat bladed tool.
2. Lift up the levers on the luggage carrier cross rails to unlock them from the side rails.
3. Remove the luggage carrier cross rails from the side rails by sliding them rearward.

Installation Procedure




1. Lift up on the luggage carrier cross rail levers in order to engage the cross rails into the side rails.
2. Slide the luggage carrier cross rails to the desired position.
3. Release the levers on the luggage carrier cross rails to lock them into position.
4. Install the luggage carrier side rail trim covers to the slots in the side rails, pressing until fully seated.