Removal and Replacement

Rear Side Door Lock Actuator Replacement

Removal Procedure

1. Remove the rear door lock. Refer to Rear Door Lock Replacement (Rear Door Lock Replacement).




2. Remove the rear door lock to rear door lock actuator screws.
3. Remove the rear door actuator from the rear door lock.

Installation Procedure




1. Align the rear door actuator to the rear door lock.
Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear door lock to rear door actuator screws.

Tighten the rear door actuator screws to 2 Nm (18 lb in).

3. Install the rear door lock. Refer to Rear Door Lock Replacement (Rear Door Lock Replacement).