Instrument Panel Compartment - Door Lock Striker Replacement

Instrument Panel Compartment Door Lock Striker Replacement

Removal Procedure

1. Open the instrument panel (I/P) compartment.




2. Remove the bolts that secure the I/P compartment striker.
3. Remove the I/P compartment striker.

Installation Procedure

Notice: Refer to Fastener Notice .




1. Install the I/P compartment striker and bolts.

Tighten the fasteners to 2 Nm (18 lb in).

2. Close the I/P compartment.
3. Inspect the I/P compartment for the proper alignment and adjust as necessary.