Fascia Grille Replacement

Fascia Grille Replacement

Removal Procedure




1. Remove the headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement in Lighting Systems.
2. Using a small flat-bladed tool, reach into the opening behind the front fascia and depress the retaining tabs (1, 2, 3, 4, 5) that lock the front fascia grille to the front fascia.
3. Remove the grille from the front fascia.

Installation Procedure




1. Position the grille retaining tabs to the slots in the front fascia.
2. Install the grille by pressing into place until the retaining tabs (1, 2, 3, 4, 5) are fully seated.
3. Install the headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement in Lighting Systems.