LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek GT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Driver Information Center Switch >> Installation

Driver Information Center Switch: Installation

  1. Align switch with trim panel and install fasteners.
  2. Connect harness connection to driver information center switch.
  3. Install IP cluster trim plate bezel, by reversing removal procedure steps  1- 4.
Fig 1: Locating Instrument Panel Cluster Trim Panel Screws
G00066122Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Driver Information Center
G00066123Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals